Industry standards and regulations continuously evolve and it can be difficult to navigate the complex landscape. We’ve rounded up the latest standards and regulations that apply to the services we provided for your convenience.
Industry standards and regulations continuously evolve and it can be difficult to navigate the complex landscape. multiVIEW Locates has rounded up the latest standards and regulations that apply to its services for you convenience.
Bill 8: An Act respecting an underground infrastructure notification system for Ontario
https://www.ola.org/en/legislative-business/bills/parliament-40/session-1/bill-8
ASCE/UESI/CI 38-22 – Standard Guideline for Investigating and Documenting Existing Utilities
https://ascelibrary.org/doi/book/10.1061/9780784415870
ASCE/UESI/CI 75-22 – Standard Guideline for Recording and Exchanging Utility Infrastructure Data
https://ascelibrary.org/doi/book/10.1061/9780784415924
CI/ASCE 38-02 – Standard Guideline for the Collection and Depiction of Existing Subsurface Utility Data
http://ascelibrary.org/doi/book/10.1061/9780784406458
CSA S250-11 – Mapping of Underground Utility Infrastructure
https://www.csagroup.org/store/product/S250-11/
ASTM D6087-08 – Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
http://www.astm.org/Standards/D6087.htm
ASCE 31-03 – Seismic Evaluation of Existing Buildings
http://by.genie.uottawa.ca/~murat/ASCE%2041-06%20(rehabilitation).pdf
ASTM D6433-11 – Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
http://www.astm.org/Standards/D6433.htm
Ontario Structure Inspection Manual (OSIM)
https://www.library.mto.gov.on.ca/SydneyPLUS/Sydney/Portal/default.aspx?component=AAAAIY&record=2cc7e50c-3d41-4468-90f1-0788368ce945
ISO 55000 Standards for Asset Management
http://www.iso.org/iso/catalogue_detail?csnumber=55088
PAS 128 – Specification for underground utility detection, verification and location
http://shop.bsigroup.com/ProductDetail/?pid=000000000030267400
Standard Guideline for Underground Utility Mapping in Malaysia
https://www.pejuta.com.my/wp-content/uploads/2015/06/Standard-Guidelines-For-Underground-Utility-Mapping-JUPEM.pdf
ASTM D6429-99 Standard Guide for Selecting Surface Geophysical Methods
https://www.astm.org/Standards/D6429.htm
ASTM 6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
https://www.astm.org/Standards/D6432.htm
North American Datum (NAD) 83 (2011) Survey Standard
https://en.wikipedia.org/wiki/North_American_Datum
Decades of experience provide multiVIEW with the technical depth and practical insight to deliver greater value to our customers.
Our Quality Management System (QMS) guides consistent project execution, technical review and delivery across multiVIEW.
Our flexible resourcing model supports changing project demands, extended coverage and responsive delivery across a wide range of project requirements.
We invest in continuous improvement through ongoing technical, operational and Health & Safety training, supported by established HS&E policies and procedures.
A full suite of Utility Engineering, Geophysics and Infrastructure Data Collection services backed by our focus on Safety, Quality and Customer Excellence.